全国统一销售电话

400-086-3021

如电话无法接通,请您拨打集团 销售专员热线

扒胎机

扒胎机

扒胎机用于轮胎的修补、更换、安装等

是汽车修理厂、汽车轮胎店和汽车装胎厂等必备的设备

For the tire repair, replacement, installation etc.,
Is the factory, car tire stores and automotive equipment necessary tire factory auto repair
扒胎机
因产品生产批次、具体型号不同,页面图片仅供参考,详情可联系德甲买球地址的销售人员进行具体核实

产品特点

Product features
  • 扒胎机

    双折弯工艺,采用5NM钢板制作的立柱,强度非常高。

    Double bending process, the column 5NM steel, very high strength.
  • 扒胎机

    胎臂两档位调节,轮胎宽度13'—15'可调节。

    Tire arm two adjustment positions, tire width adjustable 13'- 15'.
  • 扒胎机

    立柱及靠胎处设有工具盒,便于盛放一些轮胎附件或工具。

    Column and bead is provided with a tool box, easy to contain some tyre accessories or tool.
  • 扒胎机

    PL330和AL335两款助手,可轻松拆装参数内的任意扁平、硬壁轮胎,同时也可选配其他助手。

    PL330 and AL335 two assistants, easy to disassemble any flat, parameter within the stiff, also optional other assistant.
  • 扒胎机

    工作盘上设有耐磨垫片及标尺。

    Working disc is provided with an abrasion gasket and scale
  • 扒胎机

    气动可倾斜立柱操作更省时。

    The air powered tiltable pillar operation more time.

操作方法

The method of operation
因产品生产批次、具体型号不同,页面图片仅供参考,详情可联系德甲买球平台官方网站的销售人员进行具体核实
  • 扒胎机操作方法1
  • 扒胎机操作方法2
  • 扒胎机操作方法3
  • 扒胎机操作方法4
1) 把轮胎气压放掉,气门芯取出。
2) 连接电源,打开气压开关。
3) 用侧面压力器,把轮胎从钢圈槽中压出。
4) 把轮胎放到扒胎机的,轮胎固定器上。
5) 用专用撬板配合,把轮胎取下。
1) The tire pressure release valve core is taken out.
2) Connect the power supply, open the pressure switch.
3) Use the side pressure device, the tire from the steel ring groove press.
4) The tyre in tyre scraping machine, tyre fixing device.
5) Cooperate with special skid plate, the tire off.

注意事项

The matters needing attention
(1) 确保电源接好,以免损坏机器。
(2) 用侧面压力器时,不要碰到钢圈,以免损坏钢圈。
(3) 拆装轮胎时,注意胎口不要损伤,以免轮胎漏气。
(4) 操作时请注意手脚与机器联动机关的距离,以免夹伤手脚。
(1) ensure that the power supply is connected well, so as not to damage the machine.
(2) with the side pressure machine, don't touch the rim, so as not to damage the rim.
(3) assembling and disassembling tyre, pay attention to fetal mouth don't damage, so as to avoid the tire.
(4) operation note organ hands and machine linkage distance, so as not to pinch the hands and feet.

维修与保养

Repair and maintenance
(1) 工作时间到10小时,检查个联动机构并清洁润滑各系统。
(2) 经常擦拭表面,保持清洁。
(3) 工作15小时后,检查个管路,是否有漏气漏油现象。如有立即维修。
(4) 每次用完设备后,断开电源和气带的连接。

扒胎机参数

Tyre scraping machine parameters
  • 轮辋外锁定
  • 车轮直径
  • 车轮宽度
  • 压胎铲气缸作用力
  • 工作压力
  • 电源
  • 电机功率
  • 转盘扭矩
  • 净重
  • 毛重
  • 噪音
  • 包装尺寸
  • 4〞~20〞
  • 800mm
  • 260mm
  • 1800KG
  • 6-10bar
  • 110V / 220V / 380V
  • 0.75 / 1.1kw
  • 1100N.m
  • 180KG
  • 200KG
  • <70dB
  • 1000x800x800

上一产品: 拆胎机

下一产品: 油浸枕木

我要订购:






m www wap