全国统一销售电话

400-086-3021

如电话无法接通，请您拨打集团销售专员热线

自走式微耕机

自走式多功能作业机具

适用于果园农艺作业。通过配套不同的机具，可以实现耕耘、开沟、施肥、除
草、喷药等多种农艺作业。

Apply Yu Guoyuan agricultural operations. By matching different machines, can realize the cultivation,
ditching, fertilizing, weeding, spraying and other agricultural operations. 产品详情

因产品生产批次、具体型号不同，图片仅供参考详情可联系德甲买球平台官方网站的销售人员进行具体核实

On the basis of different product production batch, specific models, pictures are for reference only details
you can contact our sales staff for specific verification

开沟施
肥一体
单独
开沟
回填
除草
旋耕
操纵
灵活
安全
可靠

执行转向、掉头、前进油门大、小，农具的升、降，离合器的分、合，轻松完成旋耕、开沟、施肥、播
种、铺地膜、还配套升降机等农业作业，非常适合大田、大棚、果园、丘陵等低矮植物地段耕作。

control to perform steering, turn around, forward throttle large and small, tools of ascending, descending, clutch points, close, and easy to
complete the rotary tillage, furrowing, fertilizing, seeding, laying mulch, also supporting elevator, such as agriculture, very suitable for field, greenhouses,
orchards, farming hilly low plants such as location.

产品
性能

01

02

03

开沟施肥自动回填一次性完成、单独开沟施土杂肥、更换回填和旋耕装置后可进行回填和旋耕作业,体积小，重心低，操作灵便，可原地转向，适用于葡萄、果树、枸杞、蓝莓等经济作物的开沟施肥作业。

自走式微耕机履带底盘的优点是着地面积比，车轮式大，所以着地压强小；另外与路面粘着力较强，所能提供的驱动力大。

一般采用仿坦克结构设计，每个履带机构由一个驱动轮，一个导轮和多个负重轮组成，通过安装时的对轮系限位，将包在外侧的履带张紧，驱动轮带动履带相对车轮移动，导轮限制履带在运动中的位置，负重轮支承整个车体的重量。

产品
特点

01

履带式行走机构

Crawler walking mechanism

牵引效率高，同比轮式机械更节约能源，同时越野通过性和爬坡能力更加好；可原
地转向，大大提高了整机的机动性。

Traction efficiency is high, compared to the wheeled machinery more energy efficient, and cross-country
through sex and grade ability more superior; Can spin, greatly improve the maneuverability of the engine.

02

自走式微耕机整机尺寸

Micro tillage machine machine size

根据果树枝条距地面高度在80—84cm的特点，整机高度设计为75cm；根据葡萄行距为120—150cm的特点，整机宽度设计为100cm；根据满足间作套种和果树根系保护的不同要求，旋耕耕深设计为12cm,并采用液压控制向浅处无级调节。

According to the fruit tree branches high from the ground in 80-84 cm, the characteristics of the whole machine is designed for 75 cm high; According to the characteristics of the grapes with row spacing of 120-150 cm, the width of the whole machine is designed for 100 cm; According to satisfy the different demands of y and the root, rotary tillage farming, the deep design of 12 cm and adopts hydraulic stepless adjusting control to the light. 产品特点

03

微耕机覆盖件设计

Covering parts design

在覆盖件设计、整机布置等方面充分考虑了果园作业的特殊性，大量选用圆角化处理和遮挡处理，防止果树枝条受到伤害。

In such aspects as covering parts design, arrangment, give full consideration to the particularity of orchard operation, a lot of choose fillet processing and block processing, to prevent the damage of the fruit tree branches.

04

发动机排气特殊处理

Engine exhaust special treatment

防止吹落花粉、吹落幼果等。同时，微耕机又可配套多种属具，实现了
一机多能，提高了整机利用率，具有良好的经济性。

To prevent blow out powder, blown away young fruit, etc. At the same time, the control micro
tillage machine and supporting a variety of fittings, realizes one machine can, improve the utilization rate
of the whole machine, has a good economy.

适用
范围